What are the types of UV printer head cleaning fluids and what are the precautions for use?

The main purpose of UV printing head cleaning fluid is to clean the internal channel of the head to keep it unobstructed and to smoothly discharge ink.

What are the types of UV head cleaning fluid?

1. Sodium metasilicate.

2. Sodium hydroxide.

3. Sodium carbonate.

4. Ethylene oxide propylene oxide copolymer.

5. Carboxymethyl cellulose.

6. Fluorinated surfactant.

7. Silicone defoamer

etc. are compounded with more than ten ingredients.

Precautions for UV head cleaning fluid:

1. One head corresponds to one cleaning fluid, do not mix them.

2. If you can keep the ink discharge normal by pressing the ink, you do not need to use the cleaning fluid.

3. When the equipment is not in use, do not soak the head in the cleaning fluid for a long time, which may damage the head.

4. Wear gloves when using the cleaning fluid to clean the head.

5. If it is accidentally dropped into the eyes or comes into contact with the skin, you can seek medical attention after washing with clean water.

Storage conditions of UV head cleaning fluid:

1. Place in an environment of 5-25℃.

2. Place in a cool, dry, ventilated room, away from fire, heat sources, and avoid direct sunlight.

3. Do not place it on the ground, and do not press other things on it.

4. The shelf life is usually 1 year. Expired ones need to be thrown away and cannot be used.

Hazards of inferior UV head cleaning fluid:

1. The greater the toxicity and irritating odor of inferior cleaning fluid, the more harmful it is to human health;

2. The greater the corrosiveness of inferior cleaning fluid, the shorter the service life of the UV printer head;

3. Inferior cleaning fluid is easy to precipitate and highly flammable, and the potential threat is greater.